Evaporator Expansion and Extraction Vessels
Glass Expansion Carbon Fiber Autosampler Probe with UniFit Connector
Carbon Fiber Autosampler Probe with UniFit Connector. UniFit connector attaches directly to Glass Expansion U-Series & DC Nebulizers.Replacement of autosampler probe is recommended about every 6 months to a year. This will ensure you have unrestricted sample flow. If clogs within probes or nebulizers occur, consider using the Guardian In-Line Sample Filter (P/N NC0897716, 70-803-1108). The Guardian In-Line Sample Filter is spliced into the autosampler probe capillary & can be backflushed using the Eluo Nebulizer Cleaner for Glass Concentric Nebulizers (NC9462559, 70-ELUO), or the Eluo HF Nebulizer Cleaner for OpalMist or DuraMist (501907353, 70-ELUO-OPD), & Eluo Adaptor for In-Line Filter (NC0801128, 70-803-1160). The Guardian In-Line Sample Filter is reuseable & can last years.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tube Adaptor EZT4-16-1
Tube Adaptor EZT4-16-1. This tube adaptor fitting is used to connect this 1/16” OD capillary tube to a QSM-4 fitting.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Aluminum Skimmer Cone x-lens
Aluminum Skimmer Cone for x-lens – For Agilent 7900/8900 ICP-MS. For lowest nickel background and laser ablation applications. Not for samples containing hydrofluoric acid (HF). Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. Use Skimmer ConeGuard (70-803-1004) to protect cone threads during cleaning. When not in use, keep cones stored in original packaging for protection.For corrosive acids, including HF, use Pt Skimmer with Cu Base for x-lens, P/N 501907594, must be mounted on brass adaptor skimmer base. For organic analysis, use Pt Skimmer with Ni Base for x-lens, P/N 501907595, which must be mounted on brass adaptor skimmer base.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Aluminum Sampler Cone for Thermo Scientific Element 1/Element 2/Neptune ICP-MS (1184050)
Aluminum Sampler Cone ¿ For Thermo/Finnigan Element 1, 2 & Neptune ICP-MS. Use for lowest Ni background, and laser ablation applications. Not recommended for samples containing hydrofluoric acid (HF). Use a new Graphite Sampler Cone Gasket (501907717) each time the cone is re-installed, even if it¿s the same cone. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection.For lowest boron background and semiconductor applications, we recommend a platinum cone, see catalog number 501907711.For high sensitivity applications and low matrix containing samples, we recommend Nickel Jet Sampler, see catalog number 501907709.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Probe Connecting Line 0.18mm ID with EzyFit (Green/Black)
Probe Connecting Line 0.18mm ID with EzyFit (Green/Black). Compatible with Glass Expansion Guardian Probe ASX-112FR (P/N 70-803-2029) for Teledyne Cetac ASX-112FR Autosampler. Creates a zero dead-volume connection between Guardian Probe and nebulizer.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Quartz Tapered Injector with 2.0mm ID. A 2.0mm ID quartz tapered injector suitable for use with aqueous matrices. Compatible with PerkinElmer ICP-MS NexION 1000/2000/5000 D-Torch (30-808-3927). Not suitable for use with HF.
Quartz Tapered Injector with 2.0mm ID. A 2.0mm ID quartz tapered injector suitable for use with aqueous matrices. Compatible with PerkinElmer ICP-MS NexION 1000/2000/5000 D-Torch (30-808-3927). Not suitable for use with HF. When replacing your injector, it is recommended to replace the injector ferrule (31-808-2962), on average every 6 months. Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch with 0.8mm Injector for Agilent (Varian) 700-ES or Vista Radial
Quartz Torch, single-piece, 0.8 mm ID injector, for Agilent (Varian) 700-ES or Vista Radial Series ICP-OES. Recommended for routine volatile organic solvent analysis but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Replacement Captive Screws M4 for Brass Skimmer Adaptor Base for Agilent 7900 X Lens
Replacement Captive Screws M4 for Brass Skimmer Adaptor Base for Agilent 7900 X Lens. Package of 3 replacement M4 screws for the Agilent 7900 X Lens Brass Skimmer Adaptor Base (AT7905X-BR). These screws should be replaced if they are corroded or worn.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Ceramic Outer Tube & Optic Fiber for D-Torch
Ceramic Outer Tube & Optic Fiber for D-Torch. Compatible with Thermo 6000/7000 Duo ICP-OES. Includes Ceramic Outer Tube (501694666, 31-808-3834), Optic Fiber 170mm (31-808-2933), and Optic Fiber 450mm (31-808-3117). The shorter optical fiber assembly is used for Thermo 6000 models up to the year 2010, while the longer optical fiber assembly is used from the year 2011 onwards.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Viton Pump Tube 2tag 0.76mm ID Black/Black (PKT 12)
Viton Pump Tube 2tag 0.76mm ID Black/Black (PKT 12).Tag Colors: Black/BlackID mm: 0.76Wall Thickness mm: 0.85OD mm 2.46Overall Length: 175mm (127mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion MicroMist DC Nebulizer 0.05mL/min, 1.6mm OD
MicroMist DC Nebulizer 0.05 mL/min, includes UniFit Connector with 0.25mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and DC Gas Fitting Type 13/31 with ratchet connector (1 pc.). Compatible with Thermo PRO Duo, PRO Radial, 6000/7000 Duo & Radial Series ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min and sample flow rate is 0.05mL/min. Recommended not to exceed optimum 0.05mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. Can tolerate up to 15% TDS. MicroMist is the standard configuration for many ICP manufacturers due to its excellent sensitivity and precision at low flow rates.Replacement parts include P/Ns NFT-025 and 501907289.Recommend maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Platinum Skimmer Cone for Thermo Scientific Q/RQ/TQ Series ICP-MS (Insert-free cone replaces combination of 1324540 & 1318480 (3.5mm High Matrix Insert); 1324540 & 1311880 (2.8mm High Sensitivity Insert)
Platinum Skimmer Cone, Cold and Hot Plasma (1341430) ¿ Suitable for Thermo Q/RQ/TQ ICP-MS. specifically designed to operate ONLY with the Cold Plasma Lens Kit (1341380). This skimmer cone can be used with the Cold Plasma Lens Kit to operate in both Cold (RF Power 550 W) and Hot Plasma conditions (RF Power 1550 W). Although the highest cost option compared to Ni, it is typically the most durable, longest-lasting, and because it runs hotter it requires less frequent cleaning. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. Use Skimmer ConeGuard (70-803-1028) to protect cone threads during cleaning. When not in use, keep cones stored in original packaging for protection.For high matrix tolerance and high sensitivity, we recommend TG1048-Pt.For Robust plasma conditions, we recommend TG1045-Ni.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion High Efficiency Sample Introduction System (HE-SIS) for Nu Vitesse ICP-MS.
HE-SIS for Nu Vitesse ICP-MS. High Efficiency Sample Introduction System (HE-SIS) for Nu Vitesse ICP-MS. Originally designed as a highly efficient single-cell sample introduction system, Glass Expansion’s HE-SIS has been redesigned to provide superior performance across a wide variety of applications, including single-cell, single particle, nanoparticle, and low-volume sample studies, with up to 95% transport efficiency. Conventional ICP-MS spray chambers have low transport efficiencies (typically <5% TE) that filter out larger droplets (> 5um) from the nebulizer aerosol. The Glass Expansion HE-SIS features three critical components to overcome this significant sample transport deficiency: A High Efficiency MicroMist Nebulizer, Patent-pending MicroJet Gas Adaptor, & a High Efficiency Spray Chamber. This component combination improves the transport efficiency for superior performance.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Copper Skimmer Cone s-lens (G3280-67067)
Copper Skimmer Cone for s-lens (G3280-67067) ¿ For Agilent 7900 ICP-MS. Optional cone used with s-lens and suitable for semiconductor applications. Not for samples containing hydrofluoric acid (HF). Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. Use Skimmer ConeGuard (70-803-1004) to protect cone threads during cleaning. When not in use, keep cones stored in original packaging for protection.For corrosive acids, including HF, use Pt Skimmer with Cu Base for s-lens, P/N 501907588, must be mounted on brass adaptor skimmer base. For organic analysis, use Pt Skimmer with Ni Base for s-lens, P/N 501907589, which must be mounted on brass adaptor skimmer base.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Grainger Mech Expansion Plug Snap Handle 2.42 H
The Shaw Plugs 14M018 Mechanical Expansion Plug is a 3/8" diameter zinc alloy expansion anchor with a 1-1/4" embedment depth. It is designed for use in cracked and uncracked normal-weight concrete and can be installed in drilled holes to provide an anchoring point. The expansion plug features a cone expander with zinc plating for corrosion resistance. It is rated for tension loads up to 60 lbs and shear loads up to 45 lbs in 2,500 psi concrete when installed at the full embedment depth.